Kaizo Colosseum - Embroidery Patch - National Park
Time Remaining
0
D
00
H
00
M
00
S
$12.00
Add to cart
$5 from each item will be donated to Wings for Life ❤️
• Iron-On Patch
• ~3 x 2.61 inches (~7.62 x 6.63 cm)
• Most patches are washable, especially when sewn onto clothing. Iron-on patches are generally durable through washes but may degrade over time.
Design Done by EricPTG
Follow us on Twitter, Bluesky, Facebook, and Instagram: @tantrummerch
Iron-On Instructions
1. Preheat your iron to the cotton or medium-high heat setting (make sure the steam function is turned off and that there is no water in the iron).
2. Lay your garment flat on a hard, heat-resistant surface and iron the area where the patch will be places to remove wrinkles and moisture.
3. Carefully position the patch in your desired location.
4. Cover the patch and garment with a thin, clean cloth or parchment paper to protect the embroidery from direct heat.
5. Place the hot iron on top of the cloth and press down with firm, even pressure for about 20-30 seconds. After, turn the garment inside out and apply the iron to the back of the patch for another 20-30 seconds.
6. Allow the patch and garment to cool down completely for several minutes before testing the bond (you can gently try lifting the corner of the patch to see if it is fully secured).
2. Lay your garment flat on a hard, heat-resistant surface and iron the area where the patch will be places to remove wrinkles and moisture.
3. Carefully position the patch in your desired location.
4. Cover the patch and garment with a thin, clean cloth or parchment paper to protect the embroidery from direct heat.
5. Place the hot iron on top of the cloth and press down with firm, even pressure for about 20-30 seconds. After, turn the garment inside out and apply the iron to the back of the patch for another 20-30 seconds.
6. Allow the patch and garment to cool down completely for several minutes before testing the bond (you can gently try lifting the corner of the patch to see if it is fully secured).